We’ve all seen shipping tubes before. They’re those long, cylinder packages that have caps on both ends. Shipping tubes have a number of uses, including holding documents and artwork, as well as slender items like golf clubs, fishing poles, welding rods, and much more.
For the pro minded musician I also recommend taking a look at the Hot Rod series as those amps, although made in Mexico, are wicked cool and can take your breathe away when it comes to tone. When it comes to tone Fender has you covered. Fender has a complete line of their famous amps all reissued. Fender also has their custom line of amps that are from the old days and beyond, yet have been customized. Finally Fender has that modern line of tube beauty that will have you wondering why you don’t play guitar every minute of every day.
It’s very easy to see why this robust-sounding Tube remains so popular with savvy musicians. With such a great-sounding reissue Tube swaging available at only a fraction of the cost of the originals, it’s an attractive replacement for any 6L6 amp that has enough cabinet space to accommodate the KT66’s tall bottle.
Teenagers and older riders like the deck style water towables, the bigger the better. The thrill level is higher, there is more jostling and fighting for position and you can create the wild ride that teens and other thrill seekers are looking for.
For polishing you will need various grades of wet and dry which are 320 grit, 600 grit, 1000 grit, 2500 grit and a Tube Drilling of ordinary toothpaste. Only wet and dry will do as normal sandpaper or emery will curl and disintegrate when put in water. The toothpaste is an abrasive and is equivalent to a wet and dry of 4000 grit. You will also need a small bowl or tub of warm water some news paper and a loupe or good magnifying glass.
In this article we are going to look at the KT66 power tube. This well respected tube was introduced in the mid 1950’s by the Marconi-Osram Valve Company. They marketed their tubes under the name of “Genalex”. The KT66 was Europe’s version of the American 6L6GC.
The amount of time required to make such a go kart is about 7 weekends if not longer. Be prepared for the long haul on this project, but it is well worth it when complete.
know more about Tube drilling here.